Create your own knife

Creating both a knife and a sheath with simple utensils over three days requires some planning but is absolutely possible. Here is a step-by-step guide to help you:

Day 1: Plan and Prepare Materials

1. **Material for the knife: **

• **Blade: ** An old file, saw blade, or other carbon steel.
• **Handle: ** Wood, horn, or hard plastic.
• **Fastening: ** Epoxy glue or rivets (metal pins).

2. **Material for vagina: **

• **Leather: ** An old leather belt or a piece of thick leather.
• **Sewing Thread: ** Waxed thread or strong nylon thread.
• **Needle and tool: ** Awl or drill to make holes in the leather.

3. **Design: **

• Sketch a simple knife with a blade length of 10—15 cm and a convenient handle.
• Also plan the vagina: It should wrap around the blade and have a flap to attach to the belt.

4. **Preparation: **

• If you use a file as a leaf material, heat it to red-hot on a fire and let it cool slowly. This softens the steel for processing.

Day 2: Manufacture the knife

**Shape the blade: **

1. **Roughforming: **

• Use a file or grinding stone to shape the contour and tip of the blade.
• Sharpen the edge by filing down the angles, but leave the edge slightly thick (it will be sharpened later).

2. **Hardening the Blade: **

• Heat the leaf to a ruddy glow on a fire and cool it quickly in oil.
• Temper the blade by heating it in the oven at 200 °C for 1 hour. This makes it strong but less brittle.

**Handle: **

1. **Prepare Materials: **

• Cut out two sides for the handle from wood or other material.
• Drill holes in the material for rivets or prepare it for gluing.

2. **Assembly: **

• Attach the handle with epoxy glue and rivets (if available).
• Let the glue dry before shaping the handle with a file or sandpaper.

3. **End Puts: **

• Grind the edge with a grinding stone and polish the blade with fine sandpaper.
• Treat the handle with linseed oil or varnish for durability.

Day 3: Fabricating the Vagina

**Cut out and shape the leather: **

1. **Measure and cut: **

• Place the blade on the leather and draw a contour approximately 1 cm larger than the blade around.
• Cut out two identical pieces.

2. **Sew together: **

• Place the two pieces on top of each other and make holes along the edge with an awl or a small drill.
• Sew the edges together with a saddler stitch, which is strong and durable.

3. **Fastening and Strap: **

• Cut out a small flap and sew or rivet it to the back of the vagina to attach to a belt.

**Hone Grinding: **

• If the leather feels hard, you can soften it by rubbing in a little leather grease.
• Adjust the fit by gently shaping the leather around the knife while it is damp.

Conclusion: Test and Adjustment

• Check that the knife fits securely in the vagina without falling out.
• Test the knife to make sure it is comfortable to use and works as you intended.

With patience and accuracy, you will have both a knife and a sheath that are both practical and personal.